Today is 2021-10-22 Friday,Welcome to this site 

Industry News

Talking about the material and performance of copper sleeve

Word:[Big][Middle][Small] QR Code 2018/6/27     Viewed:    

  The copper sleeve is also called the same bearing. She is a part of the sliding rotating machine that uses the side to reduce the conflict and drive the thrust and maintain the fixing effect. The copper sleeve needs to be supplied with a smooth bearing. The copper sleeve is also made of various copper alloys to make the mechanical parts smooth. Since the smooth copper sleeve, the oil needs to be smooth. Graphite copper sleeve, no need to smooth the oil. The copper sleeve can be used on a variety of large and heavy machinery, and is an important component of the machine.

  The copper sleeve materials are as follows:
  ZCuSn10Pb1: Corrosion resistant, especially for dilute sulfuric acid, hydrochloric acid and fatty acids. Construction materials, corrosion-resistant, acid-resistant fittings, and crusher bushings and bushings.
  ZCuSn10Pb5: Smooth function, good wear resistance and corrosion resistance, suitable for bimetal forging materials. Bearings for vehicles, bimetallic bushings for internal combustion engines with peak loads up to 100 MPa, as well as piston pin bushings, friction plates, etc.
  ZCuPb10Sn10: high hardness, excellent wear resistance, not easy to get rid of the appearance, good forging function and cutting processing function, good corrosion resistance in the atmosphere and fresh water. It can be used for wear parts with high load (below 20Mpa) and high sliding speed (8m/s), such as connecting rods, bushings, bushings, gears, worm gears, etc.
  ZCuPb15Sn8: In the absence of smoothing agent and smoothing agent with water quality, it has good slidability and self-smoothing function, easy cutting, poor forging function and good corrosion resistance to dilute sulfuric acid. Bearings with high external pressure and side pressure can be used to make copper cooling tubes for cold rolling mills, parts with impact resistance up to 50Mpa, bimetallic bushes for internal combustion engines, first for piston pin sleeves with maximum load up to 70Mpa, acid resistant fittings .

  Anhui IFAG Hardware Accessories Technology Co., Ltd. provides you with: oilless bearings, sliding bearing, self-lubricating bearings, composite bearings;


Contact us

  Anhui IFAG Hardware Accessories Technology Co., Ltd.

  Contact: Mr. Li




  Address: No. 1188, Huaihai Avenue, Xinzhan District, Hefei, Anhui, China

Go Back