Today is 2020-10-17 Saturday,Welcome to this site 

Metal plastic polymer

SF-1D oilless lubricating bearing (hydraulic type)

Word:[Big][Middle][Small] QR Code 2018/7/24     Viewed:    
SF-1D oilless lubricating bearing (hydraulic type)

CSB-40钢+多孔铜粉+PTFE亲油性纤维

Product parameters
  Substrate properties
  SF-1D oilless lubricated bearings (hydraulic-specific) materials have been developed to meet the needs of high-load, fluid-lubricated hydraulics. Special additions have been added to PTFE wear-resistant materials for SF-1D oilless lubricated bearings (hydraulic-specific) The lipophilic fiber makes the material more resistant to cavitation and fluid corrosion than the general PTFE bearing; at the same time, under the condition of fluid lubrication, the friction factor of this material is extremely low and the wear resistance is better. Higher PV values can be achieved.
  Material organization
  1. The mixture of PTFE and fiber is 0.01~0.03mm, which can form a good transfer film to protect the grinding shaft and provide self-lubricating performance of the bearing.
  2. The copper powder layer is 0.20~0.35mm, which has good bearing capacity and wear resistance. Good thermal conductivity can transfer the heat generated during the operation of the bearing. The composite material can penetrate into the gap of the copper powder ball to improve the bonding strength.
  3. Low carbon steel provides good load bearing performance and heat transfer.
  4. Copper/tin plating layer is 0.002mm, which makes it have better corrosion resistance.

  Technical Parameters

Bearer

Static bearing 250N/mm2 Coefficient of friction Dry friction 0.08~0.20
Low speed operation 140N/mm2 Fluid lubrication 0.02~0.08
Rotation, rocking motion 60N/mm2 Line speed Dry friction 2m/s
Fluid lubrication >2m/s
PV value (dry friction) Intermittent operation 3.6N/mm2*m/3 Thermal Conductivity 42W(m*K)-1
Long-term operation 1.8N/mm2*m/3
Operating temperature -195℃~+280℃ Linear expansion coefficient 11*10-6*K-1
  typical application

  SF-1D oilless lubricating bearing (hydraulic-specific type) is specially developed for high-load fluid lubrication conditions, mainly used in automotive suspension systems, shock absorbers, power steering pumps, steering systems, gearboxes, etc., general industrial applications. Medium hydraulic motor, gear pump, plunger pump, vane pump, cylinder guide sleeve and logistics machinery. SF-1D oilless lubricated bearings (hydraulic-specific) are primarily used to provide excellent wear resistance and stable dynamic/static friction factors under fluid lubrication conditions.

  Anhui IFAG Hardware Accessories Technology Co., Ltd. provides you with: oilless bearings, sliding bearing, self-lubricating bearings, composite bearings;

  Website: www.ifagb.com


Contact us

  Anhui IFAG Hardware Accessories Technology Co., Ltd.

  Contact: Mr. Li

  TEL:182-9798-3468、0551-66559828

  URLwww.ifagb.com

  mailbox:3285504806@qq.com

  WeChat18297983468

  QQ:3285504806

  Address: No. 1188, Huaihai Avenue, Xinzhan District, Hefei, Anhui, China

Go Back
Print
[Upward]